Chicken Breast (Boneless)
at 350°F
The answer
25 min – 30 minat 350°F
Boneless Chicken Breasts take about 25 min – 30 min in a 350°F oven. Done is 165°F on a food thermometer, plus a 5-minute rest — never the clock alone.
SOURCE·USDA FSIS safe minimum internal temperatures·350°F planning range derived·REVIEWED JUL 2026
USDA safe zone — 165°F and above
Done is a temperature, not a time. Every figure on this page is a planning range; the green band is the only part that decides. For boneless chicken breasts it opens at 165°F and a 5-minute rest.
Source—USDA Food Safety & Inspection Service safe minimum internal temperatures—retrieved 2026-07
How this is worked out
- Anchor. Start from what USDA FSIS publishes for boneless chicken breasts — its safe minimum internal temperature of 165°F, and the FSIS roasting timetable where one exists for this cut.
- Rate. Convert the anchor into a planning rate at 350°F: a fixed published range, cross-checked against at least three independently published sources.
- Scale. This cut is timed by piece, not by weight, so the range is published as-is and widened to cover source disagreement rather than averaged.
- First check. The first thermometer reading is set at 85% of the low end of the range — early enough that an under-reading costs nothing and a late one cannot cost the meal.
- Gate. The time is only a plan. It is not done until a food thermometer reads 165°F in the thickest part, then rests about 5 minutes. Time never overrides temperature on this site.
- Round. Every printed figure is rounded to the nearest 5 minutes; precision beyond that would be invented.
plan_range = published range at 350°F
first_check = plan_low × 0.85
DONE ⟺ internal_temp ≥ 165°F AND rest ≥ 5 min
(USDA FSIS — the gate, not the clock)
SOURCE·USDA FSIS safe minimum internal temperatures·safe minimum for this cut·REVIEWED JUL 2026
350°F vs the other temperatures
Same cut, every temperature this site publishes for it.
| Oven temp | Estimated time | Notes |
|---|---|---|
| 350°F (this page) | 25 min – 30 min | |
| 375°F | 20 min – 25 min | |
| 400°F | 20 min – 25 min | most common |
| 425°F | 20 min – 20 min |
SOURCE·USDA safe-temperature guidance·timing ranges derived, see method·REVIEWED JUL 2026
When it is actually done
165°F internal
The USDA FSIS safe minimum internal temperature for this cut is 165°F, followed by a rest of about 5 minutes. The clock estimates; the thermometer decides. Every time on this page is a planning range, not a doneness test.
Sizing: Times are for typical 6–8 oz boneless, skinless breasts. Very large (10 oz+) breasts add 5–10 minutes; thin-sliced cutlets can finish in half the time.
SOURCE·USDA FSIS safe minimum internal temperatures·chicken breast (boneless) row of the FSIS chart·REVIEWED JUL 2026
The clock tells you when to start looking. The thermometer tells you when to stop.
What the ledger does not tell you
- Thickness matters far more than weight — a pounded, even breast cooks faster and stays juicier than a thick teardrop shape.
- Pull at 162–163°F and rest 5 minutes; carry-over heat finishes the job at 165°F without the chalky texture of an overshot breast.
- Bone-in, skin-on breasts run 10–15 minutes longer than these times.
Answers people ask
How long does boneless chicken breasts take at 350°F?
About 25 min – 30 min at 350°F (times are for typical 6–8 oz boneless, skinless breasts. Very large (10 oz+) breasts add 5–10 minutes; thin-sliced cutlets can finish in half the time.). It is done at 165°F internal on a food thermometer, not by the clock.
What internal temperature is boneless chicken breasts done at?
165°F, measured with a food thermometer in the thickest part, then rested about 5 minutes. That is the USDA FSIS safe minimum.
Is 350°F a good temperature for boneless chicken breasts?
It is one of 4 temperatures this site publishes for this cut (350°F, 375°F, 400°F, 425°F). Lower runs longer and more forgiving; higher runs faster with more browning. 400°F is the most common choice.
SOURCE·USDA FSIS safe minimum internal temperatures·doneness figures quoted in these answers·REVIEWED JUL 2026
More chicken timings
Where these numbers come from
Ranges are anchored to USDA FSIS published timetables where they exist, and derived from that anchor plus cross-checked published sources where they do not — widened to cover the disagreement between sources rather than split down the middle. The full reasoning is on the method page. If a figure here looks wrong, say so — corrections are prioritised.
SOURCE·USDA safe-temperature guidance·timing ranges derived, see method·REVIEWED JUL 2026
